| Name | Head Of The Organization | Contact Details | E-Mails | Address |
|---|---|---|---|---|
| Arhetipo Grup | Tel. +373 022508349 | Calea Iesilor 10, Chisinau | ||
| Arhetipo Grup | Tel. +373 0693 49287 | mun.Chisinau, str. Calea Iesilor 10 | ||
| LAMACCES SRL | Eugen Cernit | mob.: +373 69206802 Tel/fax:+373 (22) 260256 | mun.Chisinau; Str. Calea Basarabiei 18/2, Moldowa | |
| SCM Group SpA (Italy) | Luigi De Vito | Phone +39 0541 700 111 www.scmgroup.com” | via Emilia 77, Rimini (RN), Italy |
| Producer | Model Name | Type of Equipment | Technical Information | Identification Number | Local Supplier |
|---|---|---|---|---|---|
| Brandt | Ambition 1110 F | Edge bander | – electric power: 7.5 kW – working piece thickness: 8-40 mm – working material thickness: 0.4-3.0 mm – feed speed: 8 m/min | FUR-005 | Arhetipo Grup |
| Homag | Edgeteq S-200 | Edge Bander | – working width: up to 40 mm – edges size: up to 3 mm – feed speed: 8 m/min | FUR-007 | Arhetipo Grup |
| SCM Group | Nova SI 400 | Circular saw | – electric power: 7 kW – max saw blade diameter: 400 mm – cutting width: 1,000-1,500 mm – squaring capacity: 3,200-3,800 x 3,200 mm | FUR-004 | |
| SCM Group SpA (Italy) | Morbidelli cx100 | Drilling CNC Center | Speed adjustment of drilling head with inverter from 3000 to 8000 rpm Volt 400, F= 50Hz Device to increase the drilling pressure along Z axis | FUR-006 | |
| SCM Group SpA (Italy) | Stefani KD | Automatic edge bander | – panel thickness: 8-60 mm – op.speed: 0.4-8 mm – compressed air requirements: 8 bar | FUR-002 | LAMACCES SRL |
| SCM Group SpA (Italy) | Gabbiani P55 | Horizontal bean saw | – cutting length: 3300-3800-4300 mm – cutting depth: 55 mm – max. saw speed: 60 m/min – installed el. power: 7 kW | FUR-003 | LAMACCES SRL |
| SCM Group” SPA, Italy, Rimini | Cyflex S | Drilling machine with numerical CNC control | Horizontal drilling in X, 20mm – the smallest value along the Y axis; Minimum distance from the edge of the workpiece to the 120mm groove line (along the Y axis); 30 mm maximum depth of vertical drilling; Maximum value of horizontal drilling relative to the workpiece blank: (surface 1) 18 mm; Through drilling on workpieces with a thickness of up to 22mm with 8mm drills and up to 20mm – with 10mm drill bits.; Built-in saw blade assembly (disk cutter) Rotation speed: 5000 rpm. Mounting tool: 20mm – landing diameter; Groove saw blade (disc) = ‘120mm – max. diameter; 6mm – the maximum thickness of the disc. | FUR-001 | Lamacces SRL |
Developed and supported by:
Implemented by:
Verified by:
© Copyright 2021. All Rights Reserved.
